Model |
GXT-3000MTPLUSC230 |
Input |
 |
– Capacity |
3000 VA / 2700 W |
– Low Line Transfer |
180VAC/160VAC/140VAC/120VAC ± 5% |
 |
(Based on load percentage) |
– Low Line Comeback |
195VAC/175VAC/155VAC/135VAC ± 5% |
– High Line Transfer |
300 VAC ± 5% |
– High Line Comeback |
290 VAC ± 5% |
– Frequency Range |
40Hz ~ 70 Hz |
– Phase |
Single Phase with ground |
– Power Factor |
≥ 0.99 @ nominal voltage (input voltage) |
Output |
 |
– Output Voltage |
208/220/230/240VAC |
– Output Power Factor |
0.9 |
– AC Voltage Regulation |
±1% (Battery Mode) |
– Frequency Range |
47-53 Hz or 57 – 63 Hz (Synchronized Range) |
– Frequency Range (Battery Mode) |
50 Hz ± 0.5% or 60Hz ±0.5% |
– Harmonic Distortion |
≤ 3% THD (linear load); ≤ 6% THD (non-linear load) |
Overload |
 |
– Ambient Temp. <35°C |
 |
– 105%~110% |
Shuts down after 10 minutes at battery mode or transfer to bypass when the utility is normal |
– 110%~130% |
Shuts down after 1 minute at battery mode or transfer to bypass when the utility is normal |
– ≥ 130% |
Shuts down after 3 seconds at battery mode or transfer to bypass when the utility is normal |
– Current Crest Ratio |
Current Crest Ratio |
– Harmonic Distortion |
≤ 3% THD (linear load); ≤ 6% THD (non-linear load) |
Transfer Time |
 |
– AC Mode to Batt. Mode |
Zero |
– Inverter to Bypass |
4 ms (Typical) |
– Waveform (Battery Mode) |
Pure Sinewave |
Efficiency
|
 |
– AC Mode |
90 % |
– Battery Mode |
88 % |
Battery |
 |
– Battery Type |
12 V / 9 AH |
– Battery Numbers |
6 |
– Recharge Time |
4 hours recover to 90% capacity (typical) |
– Charging Voltage |
82.1 VDC ± 1% |
Physical |
 |
– Dimensions (D × W × H, mm) |
421 × 190 × 318 |
– Net Weight |
27.6 kgs |
Environment |
 |
– Operation Humidity |
20–90% RH @ 0–40°C (non-condensing) |
– Noise Level |
< 45dBA @ 1 Meter |
Management |
 |
– Smart RS-232 or USB |
Supports Windows® 2000/2003/XP/Vista/2008/7, Linux, Unix and MAC |
– Optional SNMP |
Power management from SNMP manager and web browser |