3-6S 65W Dual Port Fast Charging Power Bank Module

This module features both Type-C and USB-A interfaces, accommodating a wide range of device charging needs. It delivers up to 65W output power, supporting multiple fast charging protocols to ensure efficient and rapid device charging.

The intelligent chip supports multi-protocol fast charging including PD3.1, QC, AFC, FCP, and SCP variants, automatically recognizing and optimizing charging for connected devices.

Equipped with a digital tube display, this module shows the battery capacity accurately in real-time, allowing users to monitor remaining power at a glance and manage usage effectively.

Designed to support lithium or lithium iron phosphate batteries in 3 to 6 series (S) configurations, it allows flexible DIY power bank setups tailored to various power supply schemes.

For battery strings beyond 6 (up to 7), only lithium iron phosphate batteries are supported. Proper protective boards corresponding to the battery series count must be installed to prevent damage.

Correct polarity connection is essential: positive and negative poles should connect to B+ and GND terminals respectively to avoid damage.

Using this module at 100W output is possible with added heat dissipation measures such as a heat sink and fan for active cooling.

Currently, 3S, 4S, 5S, and 6S versions are available in stock; resistor modification is required for other configurations, recommended only for experienced users.

• Supported battery series: 3S, 4S, 5S, 6S
• Output power: 65W
• Interfaces: Type-C (PD3.1, PPS support) and USB-A
• Size: 50 x 40 x 9.5 mm
• Multi-protocol fast charging: UFCS, PE1.1, PE2.0, QC 2.0/3.0/3+, AFC, FCP, SCP, SFCP

• 1x 3-6S 65W Dual Port Fast Charging Module